From 1948 through 1965, Harley introduced the Panhead and Shovelhead, and the Panhead was exported between 1966 and 1984. There are many reasons for the Panhead’s name, including inverted baking pans on its rocker box covers, whereas the Shovelhead has the coal-shovel style cover on both instruments.
Simply so, How much horsepower does a Panhead have? The Panhead E and EL engines had displacement of 61 cubic inches and generated 8.77 horsepower. Bore and stroke of the E and EL panhead engine were 3.3 inches by 3.5 inches. The only differences between the E and the EL are the compression ratios, which are reported at 6.5 to 1 for the E and 7 to 1 for the EL engine.
What year did Harley-Davidson make the Panhead? The Harley-Davidson Panhead V-twin was introduced in 1947 in 61- and 74-inch versions. Here’s a look at the technical evolution of the engine and chassis.
Subsequently, How many cc is a Harley Panhead?
The 74-cubic inch (1,200cc) OHV Harley-Davidson Panhead was launched in 1948.
What’s the difference between a Knucklehead and a Panhead?
However, the major difference between the Panhead and the Knucklehead was Harley replacing the Knucklehead’s iron cylinders with aluminum alloy to reduce weight and dissipate engine heat better. The Panhead also featured hydraulic lifters to reduce noise and downtime for maintenance.
How fast is a Panhead? The FL Panhead produces 60 hp and 62 lb ft of torque, power is sent to the rear wheel via a four-speed manual hand shifter, and it has a top speed of approximately 105 mph.
What is better a Panhead or Shovelhead?
These two are diametrically opposed to each other, among other things. Although a small improvement over its predecessor, the Shovelhead has a bit more capability than the Panhead in terms of overall utility. In terms of efficiency, the different prototypes can, of course, have a variety of impacts on the system.
Why do they call it a Panhead Harley? The panhead is an overhead-valve Harley-Davidson motorcycle engine, so nicknamed because the rocker covers resembled cooking pans. … The Panhead engine replaced the Knucklehead engine in 1948 and was manufactured until 1965 when it was replaced by the Shovelhead.
Why do they call it a Knucklehead engine?
The knucklehead is a retronym used by enthusiasts to refer to a Harley-Davidson motorcycle engine, so named because of the distinct shape of the rocker boxes. The engine is a two-cylinder, 45 degree, pushrod actuated overhead valve V-twin engine with two valves per cylinder.
What year was the knucklehead made? The iconic “Knucklehead” — the overhead valve 61-cubic-inch V-twin introduced by Harley-Davidson in early 1936 — is a milestone motorcycle and one of the most important American bikes ever made.
What years were Harley Knuckleheads made?
It was the third basic type of V-Twin engine used by Harley-Davidson, replacing the Flathead-engined VL model in 1936 as HD’s top-of-the-line model. The engine was manufactured until 1947 and was replaced by the Panhead engine in 1948.
What is a Harley Flathead? From Wikipedia, the free encyclopedia. Flathead motorcycles are a type of bike that was a standard for pre-war motorcycles, in particular US V-twins such as Harley-Davidson and Indian, some British singles, BMW flat twins and Russian copies thereof.
How much is a 1948 Panhead worth?
Classic driver records the average cost of a restored 1948 Harley Davidson Panhead between $19,000 and $25,000, while some alternative market estimates put the average price at $26,525. The top and lowest sales are $9,000 and $52,250 respectively.
Why is it called Shovelhead?
The engine gained the nickname “Shovelhead” due to the look of the rocker heads having the appearance of an old coal shovel that was flipped upside down, giving the appearance of a shovel. While the engine did have problems earlier in its timeline, the new and improved motor gave Harley-Davidson a 26% sales increase.
Is the Shovelhead a good motor? If you follow the specs in the book and use good quality parts and have your machine work done properly, the Shovelhead is as reliable as any other motorcycle, Otherwise, it will leave you by the side of the road every time.
Did Indian make a Panhead?
Harley-Davidson had just introduced its new Panhead, which featured hydraulically adjusted overhead valves, while Indian was making do with a flathead engine that had first seen the light of day back in the early 1920s.
What does a Shovelhead motor look like?
The Shovelhead Engine (1966 – 1985)
The heads resemble the curve of a shovel, hence the name. This type of engine is the most difficult to identify because the shape does not resemble that of a traditional shovel. Instead it looks more like a coal shovel flipped upside down.
How much is a Harley Knucklehead worth? At the beginning of 2020, at Mecum’s 2020 Vegas auction, a 1940 Harley-Davidson EL Knucklehead sold for $220,000, becoming the most expensive Knucklehead ever sold at auction.
How much is a 1936 Knucklehead worth?
Not only is it nearing 100 years old, but it was also the first Harley built with the knucklehead engine. According to NADAguides, the current value of a 1936 EL Knucklehead in excellent condition is $100,000!
How much does a Harley-Davidson Knucklehead weigh? But this conservative outlook has saved the Milwaukee company from making disastrous mistakes. In the early Twenties, Harley-Davidson became the world’s biggest motorcycle manufacturer, with an annual capacity of 35,000 machines.
…
Harley Davidson FL 1200 Type 74 Knucklehead.
| Make Model | Harley Davidson FL 1200 Type 74 Knucklehead |
|---|---|
| Weight | 258 kg / 569 lbs |
How much is a 36 Knucklehead worth?
This bike is quite rare. Not only is it nearing 100 years old, but it was also the first Harley built with the knucklehead engine. According to NADAguides, the current value of a 1936 EL Knucklehead in excellent condition is $100,000!
How much does a Knucklehead cost? The price of $25,850 is far-and-away a record for the Yamaha road bike 250/350 lineage.
Why are Motors called knuckleheads?
pushrods-and-rockers overhead valve (OHV) engine. This « Knucklehead » engine, so-called because of a fancied resemblance of its rocker-box ends to the knuckles of a fist, was created to put an end to the chronic problems of the flat-head, or side-valve engines that had dominated the previous era.
What size engine is a Knucklehead? Harley Davidson FL 1200 Type 74 Knucklehead
| Make Model | Harley Davidson FL 1200 Type 74 Knucklehead |
|---|---|
| Engine | Four stroke, 45° V-Twin, OHV |
| Capacity | 1207 cc / 74 cu-in |
| Bore x Stroke | 86.3 x 101.6 mm / 3.4″ X 4″ |
| Cooling System | Air cooled |
What is an Ironhead Sportster?
The ironhead was a Harley-Davidson motorcycle engine, so named because of the composition of the cylinder heads (Iron instead of Aluminium). The engine is a two-cylinder, two valves per cylinder, pushrod V-twin. It was produced from 1957 until 1985 and was replaced by the Evolution engine in 1986.
What are the Harley-Davidson engine sizes? Big Twin (Stock) Engine Sizes:
- Flathead 45ci (737cc)
- Knucklehead 60ci (983cc) & 74ci (1212cc)
- Panhead 60ci (983cc) & 74ci (1212cc)
- Shovelhead 74ci (1212cc) & 82ci (1343cc)
- Evolution 82ci (1343cc)
- Twincam 88ci (1442cc) & 95ci (1556cc) (88/96ci bore 3.75in (95.25mm) & 4.00in stroke on 88ci (101.6 mm)
Don’t forget to share this post !