ISO Metric Machine Screw Thread Dimensions
| Thread Size | Nominal Diameter (mm) | Thread Pitch (mm) |
|---|---|---|
| M7 | 7.0 | 1.00 |
| M8 | 8.0 | 1.25 |
| M10 | 10.0 | 1.50 |
| M12 | 12.0 | 1.75 |
What size is a M8 bolt?
| Size | Clearance Hole | Tapping Drill (fine pitch) |
|---|---|---|
| M6 | 6.5 | 5.25 mm |
| M8 | 9 | 7 mm |
| M10 | 11 | 9.0 or 8.75 mm |
| M12 | 14 | 10.5 mm |
Similarly, What socket is M8 bolt? FLAT HEAD SOCKET CAP SCREW – METRIC
| Size | Head Diameter | Hexagon Socket Size |
|---|---|---|
| M5-0.8 | 11.20 | 3.00 |
| M6-1.0 | 13.44 | 4.00 |
| M8- 1.25 | 17.92 | 5.00 |
| M10-1.50 | 22.40 | 6.00 |
What size hole do you drill for a M8 bolt?
Metric Threads
| Thread | Drill size for tapping standard metric threads | Clearance hole |
|---|---|---|
| M5 | 4.2 | 5.5 |
| M6 | 5 | 6.6 |
| M8 | 6.8 | 9 |
| M10 | 8.5 | 11 |
How do you read screw sizes?
What size bolt has a 36mm head?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS |
|---|---|---|
| m36 | 36.00 | 23.38 |
| m42 | 42.00 | 26.97 |
| m48 | 48.00 | 31.07 |
| m56 | 56.00 | 36.2 |
• Jul 2, 2015
What size bolt fits a 24mm socket? A 24mm socket fits a 24mm metric bolt. It doesn’t fit correctly on any inch-based bolt. It will fit on a 15/16″ bolt but be around 0.2mm too large. So under high torque it’s more likely to round off the bolt head than the proper tool.
What does M8 1.25 mean? For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.
What size is an M8 bolt in inches?
Table 3.
| Metric | Closest Inch |
|---|---|
| M8- 1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |
What size drill bit is AQ drill bit? Drill Bit Size Chart
| Size | Decimal Equivalent | Size |
|---|---|---|
| 83 | 0.012 | 8.30 mm |
| 82 | 0.0125 | 21/64″ |
| .32 mm | 0.0126 | 8.40 mm |
| 81 | 0.013 | Q |
What size is M18 bolt?
Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M16 | 2mm | 24mm |
| M18 | 2.5mm | 27mm |
| M20 | 2.5mm | 30mm |
| M22 | 2.5mm | 32mm |
How do you read screw sizes UK? Most used 6 sizes(inch) :#6×1/2″,#6×3/4″,#8×3/4″,#8×1″,#8×1-1/4″,#10×2″.
…
UK Screw Sizes – Imperial vs. Metric.
| METRIC – 3.5mm Diameter | IMPERIAL – Gauge Size 6 |
|---|---|
| 16mm in length | 5 / 8 of an inch in length |
| 20mm in length | ¾ of an inch in length |
| 25mm in length | 1 inch in length |
| 30mm in length | 1¼ inches in length |
• Oct 15, 2021
What do screw sizes mean UK?
The gauge of a screw is defined by the thickness (diameter) of the un-threaded part of the screw known as the shank. Ordinarily, in the United Kingdom the head size is roughly twice the diameter of the shank, although there are some exceptions associated with hybrid, hardened, DIN Standard (metric) and imported screws.
What does M14 mean on a bolt?
Thread Pitch
| Metric Bolt Diameter | M6 | M14 |
|---|---|---|
| Coarse Thread Pitch (mm) | 1.0 | 2.0 |
| Fine Thread Pitch (mm) | .75 | 1.5 |
| Extra Fine Thread (mm) |
What does 8.8 mean on a bolt? In the case of a 8.8 grade bolt the first figure signifies that the Tensile Strength is at least 800MPa. The second figure signifies that the fastener will begin to yield at 80% of the Ultimate Tensile Strength, i.e. at least 640MPa.
What is 36mm in standard?
A 36mm socket is 1 7/16″ in standard(SAE) size, almost.
What is 24mm in SAE?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 23mm | 0.906 | |
| 29/32″ | 0.906 | |
| 15/16″ | 0.938 | |
| 24mm | 0.945 |
• Apr 29, 2020
Is 24mm and 15 16 the same? 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.
What does M8 mean?
M8 means « Mate. » The abbreviation M8 is an informal term of endearment for a friend. Most often used between men, M8 can also be a term of general acknowledgement. M8 uses the number 8 to replace the letters « ate. » Here are some other terms that make use of this efficiency: D8 (Date)
What is an M8 nut? M8 nuts have a diameter of 8 mm. … We stock different types of 8mm nut such as tee nuts, wing nuts and standard 8mm locking nuts. These nuts should be used with the relevant sized bolt for a snug fit.
What drill bit is 8mm?
Metric Tap and Drill Bit Size Table
| Tap | Metric Drill | US Drill |
|---|---|---|
| 6mm x 1.0 | 5.2mm | – |
| 7mm x 1.0 | 6.1mm | 15/64″ |
| 8mm x 1.25 | 6.9mm | 17/64″ |
| 8mm x 1.0 | 7.1mm | – |
What size is a letter R drill bit? Letter Size Drills
| Ltr. | Dia. |
|---|---|
| O | .316 |
| P | .323 |
| Q | .332 |
| R | .339 |
What size is a #25 drill bit?
| To Tap This Size Screw Or Bolt: | Use This Drill Bit: | Decimal Inches |
|---|---|---|
| 10-24 NC | #25 | .1495 |
| 3/16-32 NS | #22 | .1570 |
| 10-32 NF | #21 | .1590 |
| 5mm-0.90mm | 4.2mm | .1653 |
Is 5/16 The same as M8? Well, quick answer is no. They are not the same and they are not interchangeable, although they can work under certain circumstances. The most important part is understanding the meaning of M8 and 5/16 to refer to the size of a metric screw or bolt, so then we can see why they aren’t the same thing!