The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that’s slightly under 8mm which means that the bolt should fit through an 8mm hole.
How wide is a M8 bolt? Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M8 | 1.25mm | 13mm |
| M10 | 1.5mm | 17mm |
| M12 | 1.75mm | 19mm |
| M14 | 2mm | 22mm |
Similarly, What diameter is M8?
| Size | Clearance Hole | Tapping Drill (fine pitch) |
|---|---|---|
| M6 | 6.5 | 5.25 mm |
| M8 | 9 | 7 mm |
| M10 | 11 | 9.0 or 8.75 mm |
| M12 | 14 | 10.5 mm |
What size bolt has an 8mm head?
Metric Shoulder Bolt Dimensions
| Shoulder Diameter (A) | Thread (C) | Head Height (F) |
|---|---|---|
| 8mm | 6mm x 1.0 | 5.5mm |
| 10mm | 8mm x 1.25 | 7mm |
| 12mm | 10mm x 1.5 | 9mm |
| 16mm | 12mm x 1.75 | 11mm |
Do M8 nuts fit M8 bolts?
What will be the size of a nut for an M8 bolt? – Quora. An M8 Bolt Takes an M8 nut the difference will depend on threading. There are both fine thread and coarse thread fasteners so you will need to determine if your fastener is fine or coarse thread and then choose the correct M8 nut to fit that.
What size is a 8mm screw?
There is an M sized bolt or screw that is 8mm in diameter. It is roughly the same as a 5/16 bolt or screw.
How long is an 8mm bolt? Everbilt 8 mm-1.25 x 25 mm Zinc-Plated Metric Hex Bolt 35978.
What socket is M8 bolt? FLAT HEAD SOCKET CAP SCREW – METRIC
| Size | Head Diameter | Hexagon Socket Size |
|---|---|---|
| M5-0.8 | 11.20 | 3.00 |
| M6-1.0 | 13.44 | 4.00 |
| M8- 1.25 | 17.92 | 5.00 |
| M10-1.50 | 22.40 | 6.00 |
How wide is M8 thread?
ISO Metric Machine Screw Thread Dimensions
| Thread Size | Nominal Diameter (mm) | Thread Pitch (mm) |
|---|---|---|
| M8 | 8.0 | 1.25 |
| M10 | 10.0 | 1.50 |
| M12 | 12.0 | 1.75 |
| M14 | 14.0 | 2.00 |
What size hole do you drill for a M8 bolt? Metric Threads
| Thread | Drill size for tapping standard metric threads | Clearance hole |
|---|---|---|
| M5 | 4.2 | 5.5 |
| M6 | 5 | 6.6 |
| M8 | 6.8 | 9 |
| M10 | 8.5 | 11 |
What size are M8 nuts?
M8 Hexagon Nuts (DIN 934) – Marine Stainless Steel (A4) Technical Specification
| Finish | Natural |
|---|---|
| Nut Width A/F (J) | 13mm |
| Nut Width A/P (P) | 14.95mm |
| Thread Pitch | 1.25mm |
| Thread Size | M8 (8mm) |
What is an M8 screw in inches? Table 3.
| Metric | Closest Inch |
|---|---|
| M8- 1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |
What does 8g mean in screws?
The #8 gauge screw has a major diameter of 0.17″ and 8 TPI. The screw is 1-1/4″ long, a measurement taken from the bottom of the head to the point.
What does M8 1.25 mean?
For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.
Is 5/16 The same as M8? Well, quick answer is no. They are not the same and they are not interchangeable, although they can work under certain circumstances. The most important part is understanding the meaning of M8 and 5/16 to refer to the size of a metric screw or bolt, so then we can see why they aren’t the same thing!
What does M8 mean?
M8 means « Mate. » The abbreviation M8 is an informal term of endearment for a friend. Most often used between men, M8 can also be a term of general acknowledgement. M8 uses the number 8 to replace the letters « ate. » Here are some other terms that make use of this efficiency: D8 (Date)
What size bolt has a 36mm head?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS |
|---|---|---|
| m36 | 36.00 | 23.38 |
| m42 | 42.00 | 26.97 |
| m48 | 48.00 | 31.07 |
| m56 | 56.00 | 36.2 |
• Jul 2, 2015
How do you read screw sizes?
What size bolt fits a 10mm socket?
If you mean what size bolt has a 10 mm head, it is a 6 mm bolt.
What size is M8 screw in inches? Table 3.
| Metric | Closest Inch |
|---|---|
| M8- 1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |
What size is a 8.8 bolt?
Metric hex bolts, Zinc plated class 8.8 steel, 8mm x 1.0mm x 60mm – Bolt Depot.
What size drill is 8mm? Metric Tap and Drill Bit Size Table
| Tap | Metric Drill | US Drill |
|---|---|---|
| 7mm x 1.0 | 6.1mm | 15/64″ |
| 8mm x 1.25 | 6.9mm | 17/64″ |
| 8mm x 1.0 | 7.1mm | – |
| 10mm x 1.5 | 8.7mm | – |
What drill bit is 8mm?
Metric Tap and Drill Bit Size Table
| Tap | Metric Drill | US Drill |
|---|---|---|
| 6mm x 1.0 | 5.2mm | – |
| 7mm x 1.0 | 6.1mm | 15/64″ |
| 8mm x 1.25 | 6.9mm | 17/64″ |
| 8mm x 1.0 | 7.1mm | – |
Is M8 a 10mm? M8 (8mm) Thread Size (T) 5.4mm Head Length (H) DIN 933 Manufacturing Standard. 10mm Length (L)
How thick is an M8 nut?
M8 (8mm) Thread Size. 6.5mm Nut Thickness (T)
How many inches is M8 bolt? Table 3.
| Metric | Closest Inch |
|---|---|
| M8- 1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |