M8 (8mm) Thread Size (T) 5.4mm Head Length (H) DIN 933 Manufacturing Standard. 10mm Length (L)
How many inches is M8 bolt? Table 3.
| Metric | Closest Inch |
|---|---|
| M8- 1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |
Similarly, What size hole do you drill for a M8 bolt? Metric Threads
| Thread | Drill size for tapping standard metric threads | Clearance hole |
|---|---|---|
| M5 | 4.2 | 5.5 |
| M6 | 5 | 6.6 |
| M8 | 6.8 | 9 |
| M10 | 8.5 | 11 |
Is an M8 bolt 8mm wide?
But, to answer your Q – an M8 bolt will fit in an 8mm hole.
What size is an M8 bolt in MM?
Spanner and Allen Key Sizes
| Size | Spanner | Allen Key |
|---|---|---|
| M8 | 13 mm | 6 mm |
| M10 | 17 mm | 8 mm |
| M12 | 19 mm | 10 mm |
| M16 | 24 mm | 14 mm |
What is M8 in standard?
Thread Conversion Table
| Metric Coarse | Metric Fine | BSF/BSW |
|---|---|---|
| M6 x 1 | M6 x 0.75 | 1/4″ |
| M8 x 1.25 | M8 x 1 | 5/16″ |
| M10 x 1.5 | M10 x 1.25 | 3/8″ |
| M12 x 1.75 | M12 x 1.25 | 1/2″ |
What size head is a M8 bolt? FLAT HEAD SOCKET CAP SCREW – METRIC
| Size | Head Diameter | Hexagon Socket Size |
|---|---|---|
| M4-0.7 | 8.96 | 2.50 |
| M5-0.8 | 11.20 | 3.00 |
| M6-1.0 | 13.44 | 4.00 |
| M8-1.25 | 17.92 | 5.00 |
What does M8 1.25 mean? For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.
What size drill bit is AQ drill bit?
Drill Bit Size Chart
| Size | Decimal Equivalent | Size |
|---|---|---|
| 83 | 0.012 | 8.30 mm |
| 82 | 0.0125 | 21/64″ |
| .32 mm | 0.0126 | 8.40 mm |
| 81 | 0.013 | Q |
What drill bit should I use for 8mm? Metric Tap and Drill Bit Size Table
| Tap | Metric Drill | US Drill |
|---|---|---|
| 6mm x 1.0 | 5.2mm | – |
| 7mm x 1.0 | 6.1mm | 15/64″ |
| 8mm x 1.25 | 6.9mm | 17/64″ |
| 8mm x 1.0 | 7.1mm | – |
What size is M8 bolt head?
Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M7 | 1.0mm | 11mm |
| M8 | 1.25mm | 13mm |
| M10 | 1.5mm | 17mm |
| M12 | 1.75mm | 19mm |
What does M8 mean? M8 means « Mate. » The abbreviation M8 is an informal term of endearment for a friend. Most often used between men, M8 can also be a term of general acknowledgement. M8 uses the number 8 to replace the letters « ate. » Here are some other terms that make use of this efficiency: D8 (Date)
How do you read thread size?
Thread sizes are given in nominal sizes, not in the actual measurement. The exact measurement is slightly below the named or nominal size. For example, a 6mm bolt may measure 5.8mm or 5.9mm, but it is called 6mm bolt. It is also common to use “M” before the bolt size, such as M6 for a 6mm bolt.
What size bolt has a 36mm head?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS |
|---|---|---|
| m36 | 36.00 | 23.38 |
| m42 | 42.00 | 26.97 |
| m48 | 48.00 | 31.07 |
| m56 | 56.00 | 36.2 |
• Jul 2, 2015
How do I determine thread size?
What does it mean m8x1 25?
M means metric. 8 means 8mm nominal diameter (the thread will be less than 8 mm at the widest point) X 1.25 means 1.25 mm per thread (thanks the standard coarse pitch for this thread)
What size is a #60 drill bit?
Downloadable versions:
| Drill size | Diameter (in) | Diameter (mm) |
|---|---|---|
| #62 | 0.0380 | 0.9652 |
| #61 | 0.0390 | 0.9906 |
| 1 mm | 0.0394 | 1.0000 |
| #60 | 0.0400 | 1.0160 |
What size drill bit do I need for a 1/2 bolt? Use the same size drill bit as the diameter of the bolt. If you are using a 1/2″ diameter bolt use a 1/2″ drill bit.
What size is a number 44 drill bit?
The #44 drill bit (. 086 inch OD) is the standard bit used for nail axles from Cub Scout kits and other kits.
What size drill bit do I need for M8 1.25 tap? Tap Size
| Tap Size | Drill Size |
|---|---|
| M8 x 1 | 7.1mm |
| M8 x 1.25 | 6.7mm |
| M9 x 0.75 | 8.3mm |
| M9 x 1 | 8.1mm |
What size drill bit do you use for a number 8 screw?
Wood Screw Pilot Hole Sizes
| Screw Size | Hard Wood | Soft Wood |
|---|---|---|
| Tapered Bit | Straight Bit | |
| #7 | 5/32″ | 3/32″ |
| #8 | 11/64″ | 7/64″ |
| #9 | 3/16″ | 1/8″ |
What size is a #29 drill bit?
| To Tap This Size Screw Or Bolt: | Use This Drill Bit: | Decimal Inches |
|---|---|---|
| 4mm-0.75mm | 3.4mm | .1338 |
| 8-32 NC | #29 | .1360 |
| 8-36 NF | #29 | .1360 |
| 8-40 NS | #28 | .1405 |