Many people think a tedder is only for rescuing a hay or forage crop that has been rained on. Others are afraid that tedding hay will knock all the leaves off alfalfa or clover—thereby hurting the feed value of the crop. While both scenarios are possible, tedding hay typically provides more positives than negatives.
How do you rake hay with hay rake?
Similarly, What is a wheel rake used for? Wheel Rakes
These rakes are built for speed and productivity when handling dry hay. Wheel rakes are simple machines that require minimal adjustments for proper operation.
When can I tedder hay after mowing?
Initial tedding should be performed after a brief wilting period following a morning cutting while the hay is still moist (two to four hours). In very damp conditions, tedding may need to be done immediately after cutting. A second pass is usually done the next day, and the hay is raked and baled that afternoon.
Can you tedder alfalfa?
Tedders are commonly used to spread out grasses and speed drying. But many growers won’t use them on alfalfa. If the hay is too dry, tedding can knock off leaves, which robs the crop of much of its protein. … Tedding alfalfa shortly after cutting, when the crop is typically about 75% water, helps minimize leaf loss.
What does a hay rake do?
What is a Hay Rake? A hay rake rakes hay into windrows which are lines of hay that can be more easily picked up by a baler. It is a common misconception that hay can be baled directly from the swath created by the hay mower.
How long should hay dry before raking? It basically takes about three days of good weather to cure hay, which can be a challenge in late May or early June.
Which hay rake is best? Models like the Vermeer R2800 twin rake are consequently better able to handle wetter, heavier forage crops in addition to performing well in dry hay. Because teeth don’t come into contact with the ground, parallel bar rakes offer an overall durability and ease of maintenance similar to wheel rakes.
What are the three types of hay rakes?
In North America, three distinct types of hay rakes are typically used for hay and forage operations. These include wheel rakes, rotary rakes and parallel bar or basket rakes. Hay or windrow mergers are growing in use in operations where the very large forage harvesters or choppers are utilized.
What size hay rake do I need? If you want to rake two swaths on one the basic math would be to take your mower width (18 ft) + swath width (6 ft) + some wiggle room ( 2-3 ft) = about 27 ft, so 30 should work. We run a 14 ft mower, drop a 7 ft swath, and rake with a 23 ft rake.
What is a rotary hay rake?
KUHN rotary rakes produce fluffy, well-formed windrows to help you dry your hay faster. This allows you to harvest your crops at their peak nutritional value with less reliance on the weather. Long, flexible tines touch the crop just once, lifting and depositing it neatly into the windrow.
Can you windrow hay with a tedder? To work effectively, you would want a tedder that could cover two windrows at a time–23′ (and a little more) and be able to blow it out over the whole 30′. Now, since your hay is spread over 30′, you would want a rake that could reach as close to 30′ as possible. My 10’6″ mower drops windrows about 8′ wide.
Can you Ted hay twice?
it is rare that we only ted twice. we ted right after mowing as it gets all the hay fluffed up and the driven over parts unmatted. it will dry faster and evener. it is important to ted SLOW the first time so you can pick it all up.
How do you adjust a hay Tedder?
Why is it called a hay Tedder?
Does raking hay help it dry?
Raking tends to roll the wetter hay from the bottom of the swath to the outer surface of the windrow, which improves drying. Following the initial improvement, the increase in swath density can reduce drying rate, so the crop moisture content at raking is important.
Can I rake hay with dew on it?
The next morning with the night dew (90% humidity) you can rake the hay, save the leaves and that day the stems will dry some more.
Can you cut and bale hay the same day? In a trial at the University of Wisconsin Arlington Research Station (Figure 2) where alfalfa was put into a wide swath it reached 65 percent moisture in about eight hours and could be harvested for haylage the same day as cutting.
What is the best way to rake hay field?
Are rotary rakes good?
How wide is a 12 wheel hay rake?
1500 Series wheel rakes are available in 10- or 12-wheel configurations with a maximum working width of 22′ or 24′. They utilize a robust, high clearance frame paired with 5” larger rake wheels to handle larger windrows.
How wide is a 10 wheel hay rake? These hay wheels adjust so that you may position them into the right place for proper hay contact. This Grizzly® wheel hay rake has a number of different dimensions, the length is 25 ft., the working width is 17 ft. to 23 ft. and when lifted for a transport, the transport width is 10 ft.