Calculate Size
To calculate the size, simply multiply the length times the width of the room or area to be cooled. Then, as a practical number, multiply that total times 25 BTU.
Simply so, What size air conditioner do I need for a 2400 square foot home? The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It’s possible to fall between unit sizes, so if that’s the case with you, then you should choose the next higher size. That way, you can be sure that the AC unit can still cool a given area sufficiently.
What is BTU in AC? BTU is short for British Thermal Unit, a unit of measurement that shows just how much energy your air conditioner uses to remove heat from your home within an hour.
Subsequently, How do you calculate an air conditioner for a room?
To calculate a room’s area in square feet, simply multiply its length by its width. For instance, if the room is a rectangular 10 feet by 20 feet, the area would be 200 square feet. If the room is a perfectly-square 20 feet by 20 feet, the total area would be 400 square feet.
How do I find the aircon capacity of a room?
Aircon capacity to room size guide
To get a rough calculation, multiply your room size by 500. So if your room is 10 sqm. in size, you need an aircon with 5,000 kJ/hr of cooling capacity – which most 0.5 HP window type aircons have.
Is it better to undersize or oversize AC? A system properly matched to cooling loads, or even slightly undersized, will dehumidify better because it will run longer, exposing cold coils to the damp airstream for more hours of the day; removing more water (aka, “humidity”)from the airstream.
How big of a house will a 2 ton AC unit cool?
Step 5: Match your square footage to an HVAC size chart
| Home Sq Footage | Air Conditioner Size (tons) |
|---|---|
| 600 – 1,000 square feet | 1.5 tons |
| 1,000 – 1,500 square feet | 2 tons |
| 1,500 – 2,000 square feet | 3 tons |
| 2,000 – 2,500 square feet | 4 tons |
Can I replace a 3 ton AC with a 4 ton? Proper size is a must. There is no reason for you to install a 4 ton if you can use a 3 ton. The low stage isn’t that much less than full capacity because of the unloading scroll systems.
How many BTUs is 1hp aircon?
When choosing an air conditioner, usually a 1 HP (horse power) equipment is able to remove 9,000 BTU/hr of heat. With better technology, some machines are able to remove 10,000 BTU/hr of heat with the same capacity. The higher the listed BTU/hr, the greater the cooling capacity.
What is the meaning of 12000 BTU? Twelve thousand (12,000) BTUs equals one ton. This term is more often used when talking about Air Conditioners, Refrigeration Systems, Heat Pumps, and Geothermal systems. A typical home would need somewhere around 36,000 BTUs, or 3 TONs, of cooling per hour on a very hot day.
What size room will 18000 BTU cool?
BTU Sizing Chart for Mini Split Systems
| Area To Be Cooled | Capacity Needed (BTUs Per Hour) |
|---|---|
| 400 to 450 square feet | 10,000 BTUs |
| 450 to 550 square feet | 12,000 BTUs |
| 550 to 700 square feet | 14,000 BTUs |
| 700 to 1,000 square feet | 18,000 BTUs |
• Jul 18, 2016
How many BTU do I need for a 20×20 room? As a general rule, a 20×20 feet or 400 square feet room should use a 12,000 BTU or 1 Ton air conditioner. If your room is heavily shaded, you can save cost by using a 9,000 BTU or 0.75 Ton air conditioner.
What size room will a 12000 BTU air conditioner cool?
A 12000 Btu unit will effectively cool a room with a floor space of 500 to 600 square feet.
How many Btus is 1hp aircon?
When choosing an air conditioner, usually a 1 HP (horse power) equipment is able to remove 9,000 BTU/hr of heat. With better technology, some machines are able to remove 10,000 BTU/hr of heat with the same capacity. The higher the listed BTU/hr, the greater the cooling capacity.
How is aircon load calculated? Calculating a Home’s Cooling Load
- Determine the dimensions of the room or home that needs cooling. For a room, you can do this with a measuring tape. …
- For a room, multiply its length by its width to get the square footage.
- Multiply the square footage by 20. This is the measure of the BTU cooling load of the space.
What size aircon Do I need South Africa?
In general, the recommendation for air conditioners in South Africa is 500 BTU per square metre. For example, a 20 m² room would require an air conditioner with 10 000 BTU.
What happens if you have too much BTU?
A unit with too many BTU’s, will cool the room fast, but leave the room humid. Too few BTU’s will never cool the room down and the unit will run incessantly.
What happens if AC is undersized? Undersized air conditioners will struggle to ever get the room cool enough and therefore will fail to go through healthy on and off cycles. This extra wear and tear will lessen the life of your ac and cost you more in repairs.
What SEER rating should I buy?
There’s no magic SEER number. Anything over 13 is great. Because if you have an old 8 SEER system and replace it with a 16 SEER unit, you could significantly reduce the cost of cooling your home. Don’t forget to look at tax credits and manufacturer’s rebates that can bring the down the cost of a high SEER system.
What SEER AC should I get? For most homeowners, opting for a unit with a SEER between 15 and 18 is a good choice because it’s a balance between the money you’ll spend for the unit and the amount you’ll save on utility costs.
How do I know if my AC unit is big enough for my house?
Rule of Thumb — The maximum size unit you should buy would be 15% over the BTUs you need for cooling and 40% of the BTUs for heating. The max for heat pumps is 25%, since it handles both cooling and heating.
What SEER rating do I need? For most homeowners, opting for a unit with a SEER between 15 and 18 is a good choice because it’s a balance between the money you’ll spend for the unit and the amount you’ll save on utility costs.
How much more efficient is 16 SEER vs 14 SEER?
A 16 SEER unit is about 13% more efficient than a 14 SEER. For every $100 you spend to cool your home with a 14 SEER, you could save $13 on your monthly bill by upgrading to the 16 SEER unit. But just like gas mileage, your ability to meet this maximum efficiency and savings depends on a lot of other factors.
Can I use a 4 ton condenser with a 3 ton coil? The short answer is, you can’t. A good tech might be able to get it to work with like a TXV, but you are going to be bottle-necked at the 3-ton. There is no way you will get 5-ton capacity after that. It will mess up your warranty and your efficiency will be off.
Don’t forget to share this post !