A baler or hay baler is a piece of farm machinery used to compress a cut and raked crop (such as hay, cotton, flax straw, salt marsh hay, or silage) into compact bales that are easy to handle, transport, and store.
Do you need a hay Tedder? Tedders are intended to be used on crops while they are still higher in moisture and pliable. A crop that is overly dry should not be tedded due to loss of leaf material. … So, for most farmers, a tedder is a needed implement.
Similarly, Who made the first round baler? To make large round hay bales, you need a large round hay baler. And in 1966, agricultural engineer Wesley Buchele invented one.
Who made the first big round baler?
Invention & Innovation
Gary Vermeer, founder of the Vermeer Corporation in Pella Iowa, launched his big round baler in 1971. It made bales that were about 7 feet by 6 feet and weighed about a ton.
How many HP does it take to run a square baler?
Most standard square balers on the market require 35 horsepower at your tractor’s PTO, and a minimum tractor weight of around 3000 pounds. That means that they cannot be run with today’s compact tractors.
When can I tedder hay after mowing?
Initial tedding should be performed after a brief wilting period following a morning cutting while the hay is still moist (two to four hours). In very damp conditions, tedding may need to be done immediately after cutting. A second pass is usually done the next day, and the hay is raked and baled that afternoon.
Can you Ted hay with a rotary rake? The rotary rake will speed drying but by a limited amount. If you need to ted three days in a row you can do that a lot easier than re-raking in an attempt to fluff your hay back up.
How many times should I tedder hay? Hay mowen early in the morning can be tedded in the same afternoon as long as the mowen swath is dry on the top surface. It may require a second tedding the next day to speed up the drying process. Tedding can be used anytime during field curing, and it typically can reduce your field-curing time by up to 12 hours.
When did John Deere make the first round baler?
John Deere introduced their automatic, wire-tying baler, the 116-W, in 1946. The machine produced 16 x 18-inch bales. The smaller model 114-W produced 13 x 18-inch bales that weighed between 50 and 70 pounds each.
How was hay bales in the 1800s? The first hay baling equipment was invented in the late 1800s. These early baling machines were stationary, and the hay had to come to it. Hay was carried by hand to wagons that then took the hay to these early balers, where the machine pressed the hay into square bales.
When was the first hay baler made?
Nebraskan Ummo F. Leubben invented the first modern baler in 1903 and patented it in 1910. Leubben’s machine gathered the hay, rolled it into a large round bale, tied it and ejected it from the machine.
Will a Ford 8N run a square baler? You can bale with an 8N. Google youtube for some videos of it being done and you’ll have to learn how to kick it out of gear quickly if the baler starts to choke without letting the baler plunger stop – else you’ll be on your knees cleaning out the wad of hay jamming up the baler!
How big of a tractor do I need for a round baler?
For example, a baler that recommends 50 HP, I’d prefer to have a tractor at least 75 HP to pull it. As others have said, you’d probably be even happier at 100 HP. That said, for the number of bales per year you indicated, you could make do with a 50-75 hp utility tractor.
What is the smallest round baler?
The Ibex Mini Round Baler is the simplest, easiest to use mechanical baler on the market today and is as close as you can get to a “plug and play” baler. With the ability to produce 90 bales per hour, it’s perfect for small operations of 5-20 acres.
Can you Ted hay twice? it is rare that we only ted twice. we ted right after mowing as it gets all the hay fluffed up and the driven over parts unmatted. it will dry faster and evener. it is important to ted SLOW the first time so you can pick it all up.
Can you tedder alfalfa?
Tedders are commonly used to spread out grasses and speed drying. But many growers won’t use them on alfalfa. If the hay is too dry, tedding can knock off leaves, which robs the crop of much of its protein. … Tedding alfalfa shortly after cutting, when the crop is typically about 75% water, helps minimize leaf loss.
Can you windrow hay with a tedder?
To work effectively, you would want a tedder that could cover two windrows at a time–23′ (and a little more) and be able to blow it out over the whole 30′. Now, since your hay is spread over 30′, you would want a rake that could reach as close to 30′ as possible. My 10’6″ mower drops windrows about 8′ wide.
What is a belt rake? A belt rake works by moving a series of tines perpendicular to the tractor’s direction of travel, just above the ground surface. The tines are mounted to two large belts that are driven by the tractor’s PTO.
How do you do a Ted hay with a wheel rake?
Can you Ted alfalfa? Tedders are commonly used to spread out grasses and speed drying. But many growers won’t use them on alfalfa. If the hay is too dry, tedding can knock off leaves, which robs the crop of much of its protein. … Tedding alfalfa shortly after cutting, when the crop is typically about 75% water, helps minimize leaf loss.
What was the name of the company that Deere purchased to get into the hay equipment business?
John Deere acquired Dain Manufacturing. By this time, the company was producing mowers, sulky rakes, hay loaders, hay presses, and more.
How did they cut hay in the old days? It’s easy to understand why making hay was one of the most dreaded chores on the farm in the early 1700s. It had to be hand-cut with a sickle or scythe and hand-raked with a wooden rake or fork. On a good day, a farmer could harvest 1 acre of hay.
What was the first Deere tractor with live PTO and hydraulics?
After years of testing, Deere & Company released its first proper diesel engined tractor in 1949, the Model R. The R was also the first John Deere tractor with a live independent power take-off (PTO) equipped with its own clutch. The R also incorporated live hydraulics.