What does above finished floor mean? AFF – Above Finish Floor. This is an acronym commonly used in dimensioning. If you see a note saying 8′-0” AFF, it means that whatever is being referenced is 8 feet and zero inches above the surface of the finished floor (whatever you walk on, e.g. the surface of the tile, not the underlay) in that room.
Similarly, What is a finished floor? A finish floor (also known as floor covering) is the top layer of flooring. In other words, it is the layer that you walk on, and it is typically quite decorative layer compared to the layers of flooring beneath it.
What is PAD elevation?
Pad Elevation, Graded means the finished grade elevation of the building pad area for a residential or non-residential structure and does not include areas for parking, landscaping, or other non-building structure uses; Sample 1.
How thick is the floor?
The floor of one level of a home shares framing with the ceiling of the level below it. In a typical home, the entire structure between levels can be about 12 to 14 inches thick, depending on the type of joists used and the finish materials for the floor and ceiling.
What does AFF stand for?
AFF
| Acronym | Definition |
|---|---|
| AFF | Above Finished Floor |
| AFF | Away from Forum |
| AFF | Atlantic Film Festival |
| AFF | Alimentation Fine de France (French: Fine Food of France) |
What does WC mean in a house plan? Window – Basix window number. WB. Weatherboard. WC. Water closet.
What does Cos mean on a plan? PROJECT CONDITIONS OF SATISFACTION (COS)
Which floor finish is best?
Polyurethane is the most popular finish for floors. It’s tough enough to handle constant traffic and is resistant to almost everything. There are two types of polyurethane finish: oil-based (solvent borne) and water-based (waterborne).
What is finished level? Finished levels mean liveable levels, which to be specific are floors of a building that are developed with walls (specifically studs, insulation and drywall), separate rooms (if necessary), adequate ceiling height, electricity, flooring, and are heated areas for all four seasons.
What is FFL and SSL?
Correct me if Iam wrong, FFL refers to the level at the top surface of floor finish. This is where all the building element finish levels are referenced from. SFL refers to the level at the top surface of the floor screeding or concrete topping. While SSL refers to the level at the top surface of the structural slab.
What does pad ready mean? • Pad Ready = “Ready to Build”
How do you level a building pad?
Stretch the string to another stake and attach when level. Move level to next section and continue around pad until it is level all the way around. Now fill the entire area with stone to the height of the string line. Use a rake to smooth out the pad until the entire pad is level.
What is a lot pad?
From Wikipedia, the free encyclopedia. A pad site or outparcel is a freestanding parcel of commercial real estate located in the front of a larger shopping center or strip mall.
What is the space between two floors called? A mezzanine (/ˌmɛzəˈniːn/; or in Italian, a mezzanino) is, strictly speaking, an intermediate floor in a building which is partly open to the double-height ceilinged floor below, or which does not extend over the whole floorspace of the building, a loft with non-sloped walls.
How tall is a typical floor?
The height of each storey in a building is based on ceiling height, floor thickness, and building material — with a general average of about 14 feet.
How is flooring done on the ground floor?
The floors directly resting on the ground are known as ground floors while the floors of each storey are known as upper floors. Apart from giving good finished surface, these floors should have good damp resistance. The ground surface is rammed well and a layer of red earth or sand is placed which is compacted.
What does Affs mean in text? Affirmative. Another common definition of AFF is « affirmative. » Originally a term used in radio conversations to mean « yes, » AFF is now widely used in text-based communications to indicate agreement or consent.
What does AF mean in Portuguese?
Aff is an interjection that could be translated like an ‘ugh’, for instance, and it can be interpreted like a verbal eyeroll. It may be an onomatopeic word that simply relates to the transcription of the som (sound) we make when we voice those feelings, because it kind of sounds like a disappointed sigh.
What does AfD mean? Alternative for Germany (German: Alternative für Deutschland, AfD; German pronunciation: [aːʔɛfˈdeː] ( listen)) is a right-wing populist political party in Germany.
What does KS mean on a floor plan?
KS – Knee Space. PAN – Pantry. WIC – Walk in Closet.
What is CB in floor plan? CB is labeling closet spaces. These look like non-US plans, as they are in meters.
What does Ch mean on a floor plan?
C.L. – Center Line. CH. – Channel. C.I. – Cast Iron. C.I.P. – Cast in Place.