A finished floor level survey measures where the height of the floor will be in a new building.
What is FFL in building terms? Finished floor level (FFL) refers to the uppermost surface of a floor once construction has been completed but before any finishes have been applied. … The floor above may be FFL 31,000 and the floor below FFL 23,000. On some large projects, the job datum may be related to the Ordnance datum.
Similarly, What does FFL mean in drawings? Re: What does Finished Floor Level (FFL) means in Contour Pl.
How is an FFL calculated?
Locate the structural floor height specified in the flooring project plans. Add the combined height of the architectural floor material, substrates and adhesives to the structural floor height. This is the finished floor level.
What is SFL and FFL?
Correct me if Iam wrong, FFL refers to the level at the top surface of floor finish. This is where all the building element finish levels are referenced from. SFL refers to the level at the top surface of the floor screeding or concrete topping. While SSL refers to the level at the top surface of the structural slab.
What is SSL in construction?
SSL (Structural Slab Level) is typically more used within the industrial and commercial markets and is very simply the level of which the structural concrete floor slab would finish, however the term SSL is only use if there was to be other finishes to be placed over the structural slab.
What does finished floor mean? A finish floor (also known as floor covering) is the top layer of flooring. In other words, it is the layer that you walk on, and it is typically quite decorative layer compared to the layers of flooring beneath it.
What is finished floor elevation? The finished floor elevation (FFE) is the height at which the concrete slab for the 1st floor living area of the home needs to be at based on Florida Emergency Management Agency (FEMA) and specific land development code requirements.
What does WP mean in structural drawings?
Structural Abbreviations
| ASD | Allowable Stress Design |
|---|---|
| VOF | Vertical Outside Face |
| WWF | Welded Wire Fabric |
| W/ | With |
| WP | Working Point |
• Jan 16, 2020
Is SSL a TLS? Transport Layer Security (TLS) is the successor protocol to SSL. TLS is an improved version of SSL. It works in much the same way as the SSL, using encryption to protect the transfer of data and information. The two terms are often used interchangeably in the industry although SSL is still widely used.
What does NGL mean in construction?
The vertical distance from natural ground level to the roof or parapet at any point. Accordingly, the lowest point of measurement for building height is referenced to ‘natural ground level’ (‘NGL’).
What is NTS in architecture? NTS – Not To Scale. Anything drawn with a “NTS” next to it means that whatever you do, you should not get a physical scale out to measure anything.
What does FGL stand for in construction?
FGL – Finished Ground Level.
What does FCL mean in construction?
FCL: Finished ceiling level. FFL: Finished floor level.
What are architectural drawings called? Prints of architectural drawings are still sometimes called blueprints, after one of the early processes which produced a white line on blue paper.
What does FF mean on plot plan?
Also referred to as FF is Finished Floor Elevation.
What is a pad elevation?
Pad Elevation, Graded means the finished grade elevation of the building pad area for a residential or non-residential structure and does not include areas for parking, landscaping, or other non-building structure uses; Sample 1.
What does Inv mean in construction? Inv.: Invert. J-Box: Junction Box.
What is near face and far face?
The near face is the side of the panel which is exposed to the air. This is the face of the panel which you can see. The far face (or mould face), is the face of the panel which is lying on the table.
What does sod mean in construction? DEFINITION & PURPOSE. Sod is a mat of grass with an established root system used to provide immediate vegetation for erosion control. CONDITIONS FOR EFFECTIVE USE. Sod is an effective way to achieve immediate erosion protection in areas of sheet flow and low concentrated flows with velocities less than 5 feet/second.
What is the difference between tls1 0 and tls1 2?
Based on TLS 1.1, TLS 1.2 contains improved flexibility. One of the primary goals of the TLS 1.2 revision was to remove the protocol’s dependency on the MD5 and SHA-1 digest algorithms.
What OSI layer is HTTPS? Which layer of the OSI model do SSL and TLS belong to? Hey Guys, Imagine that you are accessing a secure web page, you immediately notice that you are using HTTPS (HTTP is an application layer protocol) ( which uses TCP port 443 at the transport layer).
How does TLS work step by step?
During a TLS handshake, the two communicating sides exchange messages to acknowledge each other, verify each other, establish the encryption algorithms they will use, and agree on session keys. TLS handshakes are a foundational part of how HTTPS works.
What does FGL stand for? FGL
| Acronym | Definition |
|---|---|
| FGL | Fourth Generation Language (usually seen as 4GL) |
| FGL | Fifth Generation Language (open source programming language) |
| FGL | FuturTech Gaming League |
| FGL | Finished Ground Level (buildings) |
What does TBH stand for?
Tbh: To Be Honest, the Meaning is Perfectly Clear.
What does FFF mean in construction? Form-Fit-Function (FFF) Definition and Rules.
What does OTP mean in construction? OTP
| Acronym | Definition |
|---|---|
| OTP | Order Transaction Processing |
| OTP | One Time Payment |
| OTP | Open Trading Protocol |
| OTP | One Time Programmable |
What does AFF stand for?
AFF
| Acronym | Definition |
|---|---|
| AFF | Above Finished Floor |
| AFF | Away from Forum |
| AFF | Atlantic Film Festival |
| AFF | Alimentation Fine de France (French: Fine Food of France) |