What do you do if your toilet flange is too high?
Similarly, Does the toilet flange have to be flush with the floor? The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
How do you change the height of a toilet flange?
How do you cut a floor flange for a toilet?
How do you cut a ceramic tile toilet flange?
What size hole do you cut in the floor for a toilet flange? The flange pipe can have a diameter of either 3 or 4 inches, depending on the size of the waste line, but a 4-inch hole works in both cases. Plumbers cut it with a hole saw or a reciprocating saw.
Where do you cut a toilet flange hole?
- Measure the position of the center of the flange from the back and side walls and make a mark with a pencil. …
- Place the flange pipe on the floor and center it over the mark. …
- Put a 3/4-inch drill bit into a power drill and place the tip of the bit about 1/4 inch inside the line.
What size is a toilet flange?
The most common size is the standard 4×3 inch-flange. Its top is four inches wide, while the bottom has only three inches in diameter. The former connects to the toilet, whereas the bottom element fits the outlet drain.
How do you cut a subfloor for toilet flange?
How do you cut tile adhesive around a toilet?
Can you cut porcelain toilet? Use an Angle Grinder
The most common method for cutting porcelain and ceramic tiles is to use a wet saw, which is a small table saw with a diamond cutting wheel and a trough of water through which the blade passes to keep it cool.
Are there different size toilet flanges?
Flanges come in just two standard sizes: 3 and 4 inches. You’re most likely to find 4×3 flanges when you look in a local hardware store. This model has two different diameters. The first diameter is the one that connects to your toilet.
How deep is a toilet flange?
You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
Can I use a 3 inch toilet flange? The 3-Inch Flange
This is a known issue, however, so 3-inch flanges can handle the extra load. When installing this type of flange, make sure your piping is the proper size. If your drain is not 3-inch pipe, consider using a different flange.
How do you cut a toilet flange hole in wood?
Drill a 3/4-inch hole in the outline. Install an all-purpose keyhole-style blade on a reciprocating saw, insert the blade through the hole and cut around the outline. You can also make the cut with a jigsaw and an all-purpose wood-cutting blade.
Are there different sized toilet flanges?
The most common and readily available toilet flange is the 4 x 3-inch size. This pipe is 4 inches wide at the top but only 3 inches wide at the bottom. The 3-inch bottom is the correct size for fitting the schedule 40 pipe most frequently used in home drains.
Does toilet flange size matter? The hole should be large enough to fit the flange. In most cases, 4 inches in diameter will be adequate. The placement of the hole will determine where the toilet will sit, so be sure to consider this carefully before you get started. In most homes, the back of the toilet tank is against the wall.
Do you have to remove toilet to install peel and stick tile?
With peel and stick tile, there’s no need to remove the toilet. You can tile under the toilet bowl all the way to the edge of the base, then edge it with silicone caulk to create a waterproof seal. Some harder flooring materials, such as ceramic tile and hardwood, make bathroom floors more difficult.
Should you tile behind a toilet? Should You Tile Around a Toilet? You can, but you don’t need to, as bathroom floors are generally water-resistant.
How do you cut a floor around a toilet?
Can I grind down porcelain? Porcelain tiles are a great way to improve your home. You will need to grind this tile to get rid of a stained surface, or to shape the tiles for a special installation. You will need a porcelain grinding bit and an angle grinder.
Can you file down porcelain?
Porcelain tiles are one of the most durable types of materials for flooring and wall design, often used in commercial or industrial settings. … When necessary, these can be be polished with a tile file, providing a smooth and finished appearance to visible edges.
Can you grind the bottom of a toilet? Porcelain toilets don’t call for cutting. … The versatile angle grinder will serve you well if you need to cut through a porcelain john. Before tackling the unwieldy shape of a toilet, you should make cuts on scrap porcelain.
Does toilet flange go inside or outside pipe?
Install a toilet flange on the outside. This can be done with a hammer and chisel. If the flange is cast iron with a rubber gasket, you should be able to remove the cast iron with a hammer and chisel, remove the rubber gasket with a sharp knife, then replace the gasket and the flange.
How do I know what type of toilet flange I need? A 4″ x 3″ toilet flange has a four-inch topside and a three-inch bottom diameter. The bottom of this size flange will fit standard-sized drain pipes. In addition, a 4″ x 3″ toilet flange is the size of most closet bend pipes. If you are not certain about your toilet pipe size, this flange would be appropriate to use.
Do all toilets fit the same flange? As far as the overall size of toilet itself, getting the proper rough will allow the toilet to fit the space. Toilet sizes vary beyond the rough though. Round bowls don’t project out as much as elongated, and then there are variations within the round and elongated categories as well.