Typically, elongated toilets have a length of 18.5 inches, which is about 2 inches longer than round toilets. The average length of a round-shaped bowl is 16.5 inches. Provided that the rough-in measurement is the same, you can swap an elongated toilet with a round-shaped one.
Simply so, Are all elongated toilets the same size? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying.
Are the base of toilets the same size? Most toilets will have a 12 inch rough-in. Toilets with a 10- or 14-inch rough-in measurement are a little less common, so you might have less of a selection of toilets of this size. If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in.
Subsequently, Are elongated toilets more comfortable?
Elongated toilets are more comfortable than round toilets while round toilets are more space-efficient than elongated toilets.
…
Elongated vs Round Toilets Comparison Table.
| Pros | Cons |
|---|---|
| Elongated Toilets | |
| More Comfortable for adults | Less comfortable for kids |
| Modern design | Takes more space |
• Feb 20, 2020
How do I know what size toilet to buy?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
Do all elongated toilet seats fit all elongated toilets? It’s a good thing they ask, because toilet seats are designed to fit one of two bowls: round or elongated. A round toilet seat absolutely won’t fit an elongated bowl, and, as you may have guessed, the opposite is also true.
Are toilet bowls standard size?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″. Now you can find the perfect toilet.
What is an elongated toilet? An elongated toilet bowl is oval, extending several inches more into the front of the room. As bathrooms become larger, the elongated bowl becomes more common, which may make it seem more contemporary in appearance. The round bowl shape is more often associated with older, smaller baths.
How do I know if my toilet is a 10 or 12 rough?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
How do I know what toilet to buy? Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
What is the toilet that flushes golf balls?
Champion toilet series has made headlines, demonstrating its prowess by with ease, including 18 golf balls. Champion toilet series has made headlines, demonstrating its prowess by flushing several items with ease, including 18 golf balls.
What is comfort height toilet? Traditional toilets are 15 inches high. Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches. Comfort height toilets are becoming a popular option for many households.
What are the three types of toilet?
The Three Main Types Of Toilets
- Wall Hung toilets.
- Close Coupled toilets.
- Back To Wall toilets.
How often should you replace your toilets?
Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.
How do you measure a elongated toilet seat?
What sizes are elongated toilet seats?
Elongated toilet seats measure about 18.5 inches long and about 14 inches wide. Elongated toilet seats are preferred by many, especially men, because of their extended size.
What sizes do elongated toilet seats come in?
Elongated Toilet Seats
They are characterized by the long oval shape and corresponding elongated dimensions (19-22 inches in length, 13-15 inches in width). These seats are usually preferred by men mostly because of the increased surface area when sitting on it.
How do you measure a toilet bowl? To measure the bowl shape, you can start by putting your measuring tape at the back of the toilet, and extend the tape forward to the end of the bowl, measuring parallel to the floor. The most important measurement you can take for a replacement toilet is the rough-in dimension.
Can you replace a 14-inch rough-in toilet with a 12-inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
How do I measure my elongated toilet seat?
What does 12 inch rough-in size mean for toilets?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
Can you replace a 12-inch rough-in toilet with a 10-inch rough-in toilet? A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
Can you replace a 14 inch rough-in toilet with a 12-inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
How do you measure toilet rough-in? The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
Don’t forget to share this post !