Composite decking ends can be finished by picture framing, raised fascia board, painting the ends, attaching decking veneer, composite nosing strips, vinyl stair nosing cove, composite corner trim or plastic end caps.
Simply so, How do you finish the edge of a Trex deck?
How do you hide the Trex grooved edge? Install Fascia Boards
Installing fascia boards is a common practice to hide the ends of composite decking boards. Like picture framing, it gives the decking a stylish and sleek look while hiding the exposed ends. The difference is, you will install it on the sides, directly over the edges and the rim joists.
Subsequently, How much overhang should a Trex deck have?
Trex is a popular composite material with a maximum overhang of 102mm or around 4 inches. Between one and two inches of deck board overhang is ideal when you attach an outer fascia board, or at least 1 ¾” to 2 ¾” of overhang before installing the fascia.
Can you screw down Trex decking?
You can screw or nail composite decking boards just like wood ones. Three-inch decking screws are the best fastener choice; they sink a secure distance into the joists and won’t back out like nails.
How do I fasten my Trex fascia board?
What do you put around the bottom of a deck?
Deck skirting can be an attractive feature that can be added to any low-level deck. You can use boards to construct a wall around the bottom of your deck. Another option is to use wood or vinyl lattice material. Make sure you leave gaps for ventilation to prevent mold from growing under the deck.
Why is composite decking grooved on the bottom? Appearance: The primary reason people choose grooved decking is because they don’t want to see deck screws messing up their deck’s surface. Grooved decking has slots cut into both sides so it can be installed with hidden fasteners. This results in a clean-looking deck surface without visible screws.
Can you screw down grooved composite decking?
Are Trex hidden fasteners worth it? Hidden deck fasteners are a nice way to keep the surface of your deck looking clear and unencumbered. But they are not the right fastener for all decks. In fact, using hidden deck fasteners inappropriately is a formula for failure. Some deck projects require the stronger fastening power of face screws.
How far apart should the joists be for Trex decking?
Most composite and PVC decking brands, like Trex and Azek, recommend a maximum joist spacing of 16 inches OC.
Can Trex be used for stairs?
How far can a deck board overhang a joist?
The American Wood Council states that cantilevers are limited to 1/4 the span of the joists. Joist Spacing (o.c.) Maximum allowable overhang cannot exceed 1/4 of the actual main span.
Do you need to slope a Trex deck?
“When installing Trex Porch Floorboards in a non-covered environment, the porch structure should be slightly sloped to help allow for proper drainage. Joists should be sloped 1/8″ per foot away from the house to facilitate drainage.”
Do you have to stagger Trex decking? Composite decking should not be staggered on a deck. Staggered decking requires butt joints, but composite decking expands and contracts with temperature changes making butt joints unsightly.
How do you face a Trex deck?
What is the thickness of Trex fascia?
Specifications
| Colors | Gravel Path, Havana Gold, Island Mist, Lava Rock, Rope Swing, Spiced Rum, Tiki Torch, and Vintage Lantern |
|---|---|
| Lengths Available | 12 ft |
| Nominal Dimensions (width x thickness x length) | 12 in x 1 in x 12 ft |
| Actual Dimensions (width x thickness x length) | 11-3/8 in x 0.56 in x 12 ft |
How do you install Trex hidden deck fasteners?
What can I put under my deck instead of lattice?
Alternatives to Using Traditional Lattice Under a Deck
- Create a Room for Storage, Entertainment, or Relaxation. …
- Skirt with modern wood slats. …
- Install shiplap. …
- Create a patterned look. …
- Go for vertical lines. …
- Complement a Craftsman. …
- Go for durability. …
- Plant shrubs or plants.
Should you put landscape fabric under a deck? Plants prefer moisture and soil to grow. Placing landscape fabric, garden cloth, or plastic on the ground with a good layer of gravel reduces the likelihood of weeds growing up between the deck boards. It also makes it more difficult for rodents and other critters to make a home or latrine under the deck.
Should I enclose the bottom of my deck?
Debris like old leaves and wind blown trash that accumulates can be unsightly and smell bad. To prevent these issues, you’ll need to enclose the area under your deck. Just like every other home renovation project, the options can be overwhelming.
How do you fasten composite decking without grooves?
Can you install Trex with no gaps?
When installing in temperatures below 4.5°C, Trex recommends 10 mm gapping. For docks and heavily wooded areas, Trex recommends a 10 mm gap as well. No gapping should ever exceed 13 mm.
Can you screw grooved Trex? Finishing and Fasteners
If you purchased grooved boards, you will drill screws into separate fasteners that also serve as spacers during installation. Because the fasteners used for grooved boards aren’t visible after installation, some homeowners prefer them.
Don’t forget to share this post !