Initial tedding should be performed after a brief wilting period following a morning cutting while the hay is still moist (two to four hours). In very damp conditions, tedding may need to be done immediately after cutting. A second pass is usually done the next day, and the hay is raked and baled that afternoon.
Simply so, Who invented the tedder? Bullard of Barre, Massachusetts, is credited in one source with the invention of the machine, nicknamed « the grasshopper »), typically used a system with a revolving crank in the middle of the arm and a lever at the upper end, or a system whereby rotating wheels moved the forks up and down.
Can you Ted hay twice? it is rare that we only ted twice. we ted right after mowing as it gets all the hay fluffed up and the driven over parts unmatted. it will dry faster and evener. it is important to ted SLOW the first time so you can pick it all up.
Subsequently, Can you windrow hay with a tedder?
To work effectively, you would want a tedder that could cover two windrows at a time–23′ (and a little more) and be able to blow it out over the whole 30′. Now, since your hay is spread over 30′, you would want a rake that could reach as close to 30′ as possible. My 10’6″ mower drops windrows about 8′ wide.
How do you adjust a hay Tedder?
What is a windrower used for? windrower, self-propelled or tractor-drawn farm machine for cutting grain and laying the stalks in windrows for later threshing and cleaning.
What is the difference between a hay rake and a tedder?
Tedders cause more leaf loss than rakes, especially in alfalfa hay, which is partially dry. However, tedders do allow for a quicker drying rate because of the wide swath in which the hay is placed.
What does it mean to Ted hay? Simply put, tedding is the function of lifting and separating hay in order to hasten dry down time. Why is this important? According to Josh Vrieze, Vermeer Corporation Product Manager, speeding dry down saves time, gives hay producers greater flexibility and can result in higher quality forage.
Can you tedder alfalfa?
Tedders are commonly used to spread out grasses and speed drying. But many growers won’t use them on alfalfa. If the hay is too dry, tedding can knock off leaves, which robs the crop of much of its protein. … Tedding alfalfa shortly after cutting, when the crop is typically about 75% water, helps minimize leaf loss.
How do you tedder grass?
What is tedding the hay?
A traditional European technique, tedding is the process used by growers to cure mown hay, particularly in cooler climates where drying hay thoroughly can be a challenge. Tedding speeds up drying of hay and other forage through physical manipulation: Mixing helps rotate dry grass with green.
How wide of tedder do I need?
What RPM should you run a tedder at?
Run the tedder with no more than 350 rpm’s better 300 rpm’s. The idea is to stir up the hay & not sling it a half mile. Rake or run a tedder immediately after mowing or at first light with a dew.
What RPM should you run a hay Tedder?
To obtain optimum hay fluffing on the hydraulic drive version; the tractor engine RPM should be 1500 to 1700 RPM to ensure maximum oil flow to the tedder & set the hydraulic flow valve to the middle position (#5) and adjust speed + or – to achieve the desired reel speed.
Why do farmers use a swather? A swather, or windrower, is a farm implement that cuts hay or small grain crops and forms them into a windrow. … They aid harvesting by speeding up the process of drying the crop down to a moisture content suitable for harvesting and storage.
What is windrowing hay?
A windrow is a row of cut (mown) hay or small grain crop. It is allowed to dry before being baled, combined, or rolled. For hay, the windrow is often formed by a hay rake, which rakes hay that has been cut by a mowing machine or by scythe into a row, or it may naturally form as the hay is mown.
Who invented the swather?
Yost’s company introduced the « swather » (later renamed the « windrower ») in the mid-1950s. In addition to mowing, windrowing, and being self-propelled, the swather has an innovation that enables hay to dry faster and more thoroughly.
What does a tedder look like?
How do I know if my hay is dry enough to bale?
How many times should you turn hay? Hay should be cut when dry at the end of a sunny day when sugar levels are at their highest and tedded immediately after cutting. In good weather the grass is tedded twice daily and in very good sunny, breezy weather haymaking should be achieved in 3 to 4 days.
Can you Ted hay with a rotary rake?
The rotary rake will speed drying but by a limited amount. If you need to ted three days in a row you can do that a lot easier than re-raking in an attempt to fluff your hay back up.
How fast do you tedder hay? Run the tedder with no more than 350 rpm’s better 300 rpm’s. The idea is to stir up the hay & not sling it a half mile. Rake or run a tedder immediately after mowing or at first light with a dew.
Don’t forget to share this post !