ASA can perform static routing, Default routing also dynamic routing protocols like EIGRP, OSPF, and RIP. ASA can operate in two modes: Routed mode: In this mode, ASA acts like a layer 3 device (router hop) and needs to have two different IP addresses (means two different subnets) on its interface.
Likewise, How do I show a license on a Cisco switch?
You can use the show license brief command to display a list of license files installed on the switch. You can use the show license file command to display information about a specific license file installed on the switch.
Also, How Asa filters the traffic?
Filters consist of rules that determine whether to allow or reject tunneled data packets that come through the security appliance, based on criteria such as source address, destination address, and protocol. You configure Access Control Lists (ACLs) in order to permit or deny various types of traffic.
Secondly, What are three characteristics of the ASA routed mode?
What are three characteristics of the ASA routed mode? (Choose three.)
- This mode is referred to as a “bump in the wire.”
- In this mode, the ASA is invisible to an attacker.
- The interfaces of the ASA separate Layer 3 networks and require different IP addresses in different subnets.*
Furthermore How do you set ASA in transparent mode? In configuration mode, execute the command firewall transparent:
- ASA# conf t. ASA(config)# firewall transparent. Step 2 – …
- ASA(config)# interface Ethernet 0/0. ASA(config-if)# switchport access vlan 10. ASA(config-if)# no shutdown. …
- ASA(config-if)# interface vlan 10. ASA(config-if)# nameif outside.
Do Cisco switches require a license?
Cisco DNA term licenses and Network Stack perpetual licenses are smart product IDs (SKUs). Both licenses are required with a hardware purchase.
How does Cisco licensing work?
Traditionally, Cisco licensing has offered a perpetual licensing model in which you buy once and keep the license through the life of the hardware. … The software features you buy on top of the hardware are licensed separately and require their own support contract.
How do I check my router license?
This can be done by going to the Cisco Product License Registration Portal on the website where you enter the PAK and the UDI. Cisco will check if your PAK and UDI are valid and that you haven’t activated the PAK before for another router. If everything is OK, they will e-mail you the license key.
How do I filter traffic on my VPN?
- Determine all the networks located behind VPN connections (VPN Pools and L2L VPN remote networks)
- Determne all the local network to which those VPN networks need access.
- Allow all traffic from remote networks to local network on the « outside » interface ACL first.
What is Botnet Traffic Filter?
Malware is malicious software that is installed on an unknowing host. The Botnet Traffic Filter checks incoming and outgoing connections against a dynamic database of known bad domain names and IP addresses (the blacklist), and then logs or blocks any suspicious activity. …
What do ACLs do on an ASA?
Standard ACLs—Standard ACLs identify traffic by destination address only. There are few features that use them: route maps and VPN filters. Because VPN filters also allow extended access lists, limit standard ACL use to route maps.
What must be configured on an ASA before it can be accessed by ASDM?
What must be configured on an ASA before it can be accessed by ASDM? Before an ASA can be accessed using ASDM, the ASA must have access permissions and the ASA web server enabled. Furthermore, a management interface must be configured.
What is the default mode of firewall?
The routed firewall is the default mode for an ASA firewall. It acts as a layer 3 device and is a routed hop; this acts in the same way as a router would. It uses routing protocols and static routes. Forwarding is down with destination IP addresses.
What two features must match between ASA devices to implement a failover configuration?
What two features must match between ASA devices to implement a failover configuration? Software, licensing, memory, and interfaces, including the Security Services Module (SSM).
What is firewall transparent mode?
Transparent mode converts the firewall device from its default layer 3 route mode to what is essentially a layer 2 bridge. … Once all interfaces have been converted to the layer 2 zones, the device is considered to be in transparent mode.
What is transparent firewall in Asa?
Using the Transparent Firewall in Your Network
The ASA connects the same network between its interfaces. Because the firewall is not a routed hop, you can easily introduce a transparent firewall into an existing network.
How does a Layer 2 firewall work?
A Layer 2 transparent firewall operates on bridged packets and is enabled on a pair of locally-switched Ethernet ports. Embedded IP packets forwarded through these ports are inspected similar to normal IP packets in a routing network.
What is Cisco DNA licensing?
DNA Advantage licence is used in Devices ( switches and routers ) by which it delivers. policy-based automation with SD Access, monitoring, and Cisco DNA Assurance.
What is the difference between IP base and IP services?
IP Base feature set includes advanced quality of service (QoS), rate limiting, access control lists (ACLs), and basic static and Routing Information Protocol (RIP) functions. … IP Services image provides a richer set of enterprise-class features, which includes advanced hardware-based IP unicast and IP Multicast routing.
What is Cisco Network Advantage license?
Cisco DNA Advantage delivers policy-based automation with SD-Access, monitoring, and Cisco DNA Assurance. Customers need to buy ISE Base, ISE Plus, and Stealthwatch ® to enable all Cisco DNA use cases. Cisco DNA Premier delivers policy-based automation with SD-Access, Cisco DNA assurance, and enhanced security.
Is Cisco Smart licensing required?
Smart Licensing was made mandatory on Cisco IOS XE 16.10. 1a for all the routing platforms. The following are the list of platforms that support Smart Licensing: … All ISR 4000 series routers and ISR 1100 series routers.
What is the difference between Cisco and Sysco?
Sysco, based in Houston, is the nation’s leading food-service distributor. Cisco is breaking ground in the new world of computer technology. Sysco is harvesting profits in a well-established world of food distribution to hotels, restaurants, hospitals and other institutional sites.
What are the benefits of Cisco Smart licensing?
Cisco Smart Licensing gives customers more control over their purchases and enables them to visualize where all their assets are deployed. As long as the pool has enough licenses, customers can move licenses between equipment more easily without engaging Cisco.
How do I activate license on my router?
How to Activate a Cisco License? More Steps:
- Login on: https://www.cisco.com/go/license. …
- Fill in the PAK, and submit.
- If you have more different feature license, you can combine it into a license file, and click on “all done” and then fill in the requested info of machine.
What is datak9 license?
Cisco IOS Packages and Licenses
DATA (datak9) – Data features found in SP Services and Enterprise Services IOS image on ISR Routers. It support MPLS, ATM, and Multiprotocol support. Security (securityk9) – It support Cisco IOS Firewall , IPS , IPsec , 3DES, VPN etc.
What is license Udi PID?
Therouter license is similar to any other software license in Cisco. It is tied to the Unique Device Identifier (UDI) —where the license is integrated to the PID (Product Identifier) and SN (Serial Number). A license generated for one router cannot be shared or installed in any other router.
Don’t forget to share this post on Facebook and Twitter !